Mitsubishi Electric MELFA CR750 Series User Manual page 339
Hide thumbs
Also See for MELFA CR750 Series:
- Instruction manual (159 pages) ,
- Manual (2 pages) ,
- Ethernet function instruction manual (146 pages)
Table of Contents
Advertisement
16.2.2.6. Execution line number of program
The line number of program being executed is displayed.
(1) Click the position (block) in which execution line number is displayed (<a>). Left side of the box is
arranged in this position.
(2) After "Select item" window is displayed, click [Robot information] button (<b>).
(3) Select "Exe line num" (<c>) as the type on "Create robot information" window.
(4) After setting the information of execution line number, click [OK] button (<d>).
<1>
<2>
<3>
<4>
<d>
Figure 16-11 Creating a display of the execution line number of program
<1> Size
<2> Slot
<3> Arrangement
<4> Color
16-339
<a>
<c>
: Set the width of box in which execution line number is displayed. The value
from 1 to 16 can be set.
: Select task slot number for which the program is executed.
The range of slot number that can be set is different according to the system
that uses it.
: Select the position in which execution line number is arranged.
: Select the background color of the area where execution line number is
displayed.
<b>
When User definition screen (TB) is shown
16-339
Advertisement
Table of Contents
