13.7.1. Register the Password
The password is registered to the robot controller.
Click the "Register/Change" button of the item to which register the password in "Password Setup" screen.
After inputting the password in the "Register/Change Password" screen, click the [OK] button. The input
password is displayed by "*" or "●".
Please input the password by 8 characters or more, and 32 characters or less. The character that can be
used is as follows.
Character that can be used by password (8 characters or more, and 32 characters or less)
Number ( from 0 to 9 )
Alphabet (from A to Z, and from a to z)
Caution
Please note the management of the password enough.
It becomes impossible to release the security function of the robot controller when the password is
forgotten. Please note the management of the password enough.
13-299
Table 13-17 Character that can be used by password
(Notes)The capital letter and the small letter of the
alphabet are distinguished.
Figure 13-47 Register Password
13-299