Mitsubishi Electric MELFA CR750 Series User Manual page 385


Solenoid valve
Select the [Solenoid valve] checkbox, you can see the solenoid valve correspond to the robot in the 3D
monitor. You can check the collision of the robot and a peripheral device.
This function can be used with the robot which can attach a solenoid valve as follows, and display the
solenoid valve which has 4 valves.
Solenoid valve
Robot
which can display a solenoid valve
This function can be used with the robot model of the 3D monitor is "Detailed model"
This function can be used with version 3.50C or later of this software.
17-385
1F-VD0*(E)-02
1F-VD0*(E)-03
RV-4F series
RV-7F series
RV-13F series
RV-20F series
Figure 17-20 Solenoid valve display
(* = The number of valves)
17-385