Initializing The Battery Remaining Time; Serial Number - Mitsubishi Electric MELFA CR750 Series User Manual

13.2.4. Initializing the battery remaining time

This initializes the remaining battery time in the robot controller.
On the initialization screen, click the remaining battery time [Initialize] button.
A confirmation screen is displayed, so input "Yes", then click the [OK] button.
Caution
Do not initialize unless the battery has been replaced.
Be careful. If you initialize the remaining battery time other than when the battery is replaced, it
becomes impossible to reference a correct reading for the remaining battery time.

13.2.5. Serial number

This checks the serial number in the robot controller and sets the serial number for the connected robot
On the initialization screen, click the serial number group [Set] button.
This function can only be used with CR750/700 series robot controllers.
The first time you start up a CR750/700 series robot controller after purchase, the C0150 warning (robot
main unit serial number not set) is generated. On this screen, set the robot main unit serial number.
13-256
Figure 13-12 Confirmation Screen for Battery Time Remaining
Figure 13-13 Serial Number Input Screen
13-256