Mitsubishi Electric MELFA CR750 Series User Manual page 143

Caution
After this software Ver.1.5, the comparison methods of the position
variable are changed.
Comparing the program before this software Ver.1.4, It was judged to be different in the notation
of the value of each ingredient of the position variable that I showed below with different position
variables. After Ver.1.5, the thing that the value of each ingredient of the position variable accords
is changed to judge it to be the same position variable.
8-143
# A variable example for the comparison
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
1
P1=(1.000,2.000,3.000,4.000,5.000,6.000)(7,0)
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
2
P1=(+1.00,+2.00,+3.00,+4.00,+5.00,+6.00)(7,0)
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
3
P1=(1.00, 2.00, 3.00, 4.00, 5.00, 6.00)(7, 0)
8-143