Mitsubishi Electric MELFA CR750 Series User Manual page 348

16.2.8.2. Erasing the ruled line
(1) Click [Line] button (<a>) on the window.
(2) The button ("[Top],[Bottom],[Left],[Right]") (<b>) for the ruled line is displayed in the right of [Line] button.
These buttons to draw the ruled line disappear when [Line] button (<c>) is clicked again.
(3) Select the kind of ruled line (<d>). Only one kind of the ruled line can be selected.
(4) Click the block (<e>) where the ruled line is erased. The ruled line of the specified position on the selected
block can be erased.
<e>
(5) After editing the ruled line, click [Line] button (<f>) again.
16-348
<a>
<c>
<f>
<b>
<d>
16-348