Configuration Examples - Nokia ESB26 User Manual

7.
Displaying the LACP Interfaces
The show link-aggregation lacp command, in Privileged (Enable) mode, displays a list of all
LACP enabled interfaces on the switch with the configured LACP parameters.
Command Syntax
device-name#show link-aggregation lacp
Example
device-name#show link-aggregation lacp
System ID = 00 a0 12 02 02 02
System priority = 32768
========+========+=======+=========
Port | Mode |
--------+--------+-------+--------+
1/1/1 | active |
1/1/2 | active |
1/1/3 | active |
========+========+=======+=========

Configuration Examples

Simple LACP Configuration
The following example establishes dynamic link aggregation between two switches, as shown
Figure 7-2.
MN700004 Rev 01
Link Aggregation Groups (LAGs)
Key | Prty |
3 | 32768 |
3 | 32768 |
3 | 32768 |
Figure 7-2: Example of LAG Containing Two Ports
58