Nokia ESB26 User Manual page 398

36.
Start primary application...
Entering into self-test switch mode. Please wait...
All ports --> OK
test all
The test all command, in self-test mode, performs all tests subsequiently.
Command Syntax
device_name(self-test)#test all
Example
device_name(self-test)#test all
Normal switch operation will be interrupted. Proceed ? [y/n] : y
Testing CPU:
CPU validation --> OK
Testing Switch Core:
Switch core validation --> OK
Testing loader:
Image Size = 0x7bf00
Loader in NVM is OK
Testing application:
Image Size = 0x2D7313
Application image in NVM is OK
Testing startup configuration:
Startup configuration in NVM is OK
Testing script file system:
Script file system in NVM is OK
Testing java image:
Image Size = 0x200000
Java image in NVM is OK
Testing PROM access:
Validation of PROM passed OK
Testing RAM:
Verifying validity of primary application.....OK
Start primary application...
Press Escape to stop the test
Data Bus Test: Walking One --> OK
Data Bus Test: Walking Zero --> OK
MN700004 Rev 01
Diagnostic Tests
CRC Value = 0x0495d8b3
CRC Value = 0xD78F9816
CRC Value = 0x9A4109E5
387