Nokia ESB26 User Manual page 380

34.
Example
device-name(config)#dot1x timeout tx-period 60
Setting the Unicast Supplicant Compatibility
The dot1x unicast-client-compatibility command, in Global Configuration mode, sets a
mode that allows dot1x to work with supplicants, but without sending EAPOL packets to
802.1X group MAC addresses. The no form of this command sets a mode in which the dot1x
does not work with supplicants and does not send EAPOL packets to 802.1X group MAC
addresses.
By default, this mode is disabled.
NOTE Enabling this feature can affect the switch's performance.
Command Syntax
device-name(config)#dot1x unicast-client-compatibility
device-name(config)#no dot1x unicast-client-compatibility
802.1X Interface Configuration Commands
The table below lists the 802.1X interface configuration commands.
Table 34-5 802.1X Interface Configuration Commands
C o m m a n d
dot1x port-control
dot1x re-authenticate
dot1x multiple-hosts
dot1x control-direction
permit-in-traffic
Setting the Control Type for a Specified Port
The dot1x port-control command, in Interface Configuration mode, sets 802.1X control type
for the specified port. The no form of this command disables the dot1x for the specified port.
The command dot1x port-control entered without specifying a control type, sets the switch
to auto mode.
The default mode is force-authorized.
Command Syntax
device-name(config-if
authorized | force-unauthorized]
MN700004 Rev 01
802.1X Port-Based Authentication
D e s c r i p t i o n
Sets the 802.1X particular control type for the specified port.
Activates re-authentication for all supplicants that are connected
to a specified port.
Sets 802.1X to Multiple-Hosts mode on a specified port.
Sets the dot1x traffic mode to Bi-directional Traffic Control per
port basis.
UU/SS/PP)#dot1x
369
port-control [auto | force-