23.
•
IGMP And Multicast Configuration
•
Port configuration
show running-config
The show running-config command, in Privileged (Enable) mode, displays information
regarding the updated run-time configuration of the switch.
The command is equivalent to the write terminal command.
Command Syntax
device-name#show running-config
Example
device-name#show running-config
building the configuration ...
! current configuration:
!
! ESB26 Version 3.3.0
!
...
Further information displayed includes the following:
•
IP Address
•
SNMP Server Configuration
•
Web-Server Configuration
•
Protocol Configuration
•
Spanning tree enable/disable
•
VLAN Configuration
•
Monitor Session configuration
•
IGMP And Multicast Configuration
•
Port configuration
show boot-mode
The show boot-mode command, in Enable mode, displays the configured boot mode.
Command Syntax
device-name# show
Example
device-name# show
Boot mode is primary
MN700004 Rev 01
Software Upgrade and Reboot Options
boot-mode
boot-mode
281