Nokia ESB26 User Manual page 119

11.
Displaying FDB Table Entries
show mac-address-table
The show mac-address-table command, in Privileged (Enable) mode, displays the FDB
entries stored in the switch, and other data pertaining to the FDB table, as specified by the
command arguments.
Command Syntax
device-name#show mac-address-table [dynamic|filtered|secure|static] [address
HH:HH:HH:HH:HH:HH] [vlan <vlan-id>] [interface UU/SS/PP]
device-name#show mac-address-table count
Argument Description
address (Optional) Information is displayed about the specified MAC address, if it complies with
HH:HH:HH all other specified arguments.
:HH:HH:H
H
interface (Optional) Information is displayed about the MAC addresses on the specified interface,
UU/SS/PP if they comply with all other specified arguments.
vlan (Optional) Information is displayed about the MAC addresses for the specified VLAN, if
<vlan-id> they comply with all other specified arguments.
dynamic (Optional) Information is displayed only about the dynamic MAC addresses.
filtered (Optional) Information is displayed only about the filtered MAC addresses.
secure (Optional) Information is displayed only about the secure MAC addresses.
static (Optional) Information is displayed only about the static MAC addresses.
count Displays the number of entries in the FDB table.
aging-time Display MAC address table aging-time
multicast Display multicast addresses
self Display self addresses
NOTE
If no arguments are specified, the show mac-address-table command displays the entire
FDB table.
Example
The following command displays the entire FDB table.
device-name#show mac-address-table
====+========+=====================+==========+=================+=========|
# | VID | Mac
----+--------+---------------------+----------+----------------+----------+
1 | 0001 | 00:00:00:00:11:22
2 | 0001 | 00:40:95:30:0e:8f
MN700004 Rev 01
Forwarding Database (FDB)
| PORT
| 1/1/3
| 1/1/7
108
| STATUS | PRIORITY |
| static | 0
| dynamic | 0
|
|