Nokia ESB26 User Manual page 103

10.
specified in Table 10-5.
TAG-NAME The notification tag.
Example
device-name(config)#snmp-server notify linkUp tag1
Table 10-5 Notification Argument Values
A r g u m e n t V a l u e
resilientLinkStatusChange
linkup
linkDown
coldStart
warmStart
authenticationFailure
risingAlarm
fallingAlarm
newRoot
portSecurityViolation
MN700004 Rev 01
SNMP Server Configuration
D e s c r i p t i o n
Indicates that the resilient link status was changed, identified by the
resilientLinkIndex.
Indicates that the SNMP entity acting as an agent has detected that
the ifOperStatus object for one of its communication links left the
down state and transitioned into another state (but not into the
notPresent state). The other state is indicated by the included value of
ifOperStatus.
Indicates that the SNMP entity acting as an agent has detected that
the ifOperStatus object for one of its communication links is about to
enter the down state from some other state (but not from the
notPresent state). This other state is indicated by the included value
of ifOperStatus.
Indicates that the SNMP entity acting as an agent is reinitializing itself
and that its configuration may have been altered.
Indicates that the SNMP entity acting as an agent is reinitializing itself
such that its configurationis unaltered.
Indicates that the SNMP entity acting as an agent has received a
protocol message that
authentication method depends on the version of SNMP that is used.
For SNMPv1 or SNMPv2c, authentication failure occurs for packets
with an incorrect community string. For SNMPv3, authentication
failure occurs for packets with an incorrect SHA/MD5 authentication
key or for a packet that is outside of the authoritative SNMP engine's
time window.
Note:
The generation of authentication failure notification is also controlled
by the snmp-server authentication-failure-trap command.
RMON alarm which is generated when a value rises above its pre-
programmed threshold.
RMON alarm which is generated when a value falls below its pre-
programmed threshold.
Indicates that a new root is elected by the Spanning Tree algorithm.
Indicates that a security violation was made on a port defined as a
secure port. For more information, see
92
is not properly authenticated. The