Nokia ESB26 User Manual page 237

18.
============================================================
Interface | priority-level
----------+-----------------+------+----------+-------------
1/ 1/ 1 | 3
1/ 1/ 2 | 0
1/ 1/ 3 | 0
...
1/ 1/48 | 0
1/ 2/ 1 | 0
1/ 2/ 2 | 0
1/ 2/ 3 | 0
Displaying Drop Level Priority
The show qos drop-level command, in Privileged (Enable) mode, displays the Drop level
priority mapping.
Command Syntax
device-name#show qos drop-level
Example
device-name#show qos drop-level
=======================
Priority | Drop Level
----------+------------
0 | green
1 | green
2 | red
3 | yellow
4 | green
5 | green
6 | green
7 | green
Displaying Traffic Shaping
The show qos shaper command, in Privileged (Enable) mode, displays the transmit rate for
the transmit port or transmit port and queue.
NOTE Since the rate granularity is limited, whenever you set the rate you will see a message
specifying the rate that is actually configured.
Command Syntax
device-name#show qos shaper
Example
device-name#show qos shaper
Interface 1/1/1
==================
qos shaper queue 2 rate 2M burst 64K
1/ 2/ 4 | 0
MN700004 Rev 01
Quality of Service
| txq | override | Drop Algorit
| 3 | yes
| 0 | no
| 0 | no
| 0 | no
| 0 | no
| 0 | no
| 0 | no
| 0 | no
226
| GRED
| Tail-Drop
| Tail-Drop
| Tail-Drop
| Tail-Drop
| Tail-Drop
| Tail-Drop
| Tail-Drop