Write Terminal - Nokia ESB26 User Manual

23.
•
Reload factory-default configuration settings;
•
Store the unit's current configuration on the NVRAM of the switch.
Table 23-2 Write Commands
C o m m a n d D e s c r i p t i o n

write terminal

Displays detailed information regarding the current configuration of the unit on the
terminal monitor.
The command is equivalent to the show running-config command.
write erase Resets the current configuration of the unit stored on the NVRAM of the switch. The
start-up configuration file is set to factory-default values.
This command is similar to reload to-defaults, except that it does not restart the
switch.
write memory Stores the unit's current configuration on the NVRAM of the switch.
The command is equivalent to the copy running-config startup-config command.
write terminal
The write terminal command, in Privileged (Enable) mode, displays detailed information
regarding the current configuration of the unit on the terminal monitor.
The command is equivalent to the show running-config command.
Command Syntax
device-name#write terminal
Example
device-name#write terminal
building the configuration ...
! current configuration:
!
! version 3.5.9.2 $revision: 1.110 $
!
...
Further information displayed includes the following:
• IP Address
• SNMP Server Configuration
• Web-Server Configuration
•
Protocol Configuration
•
Port Configuration
•
All Connected Interfaces
• QoS Configuration
• Resilient Link Configuration
• VLAN Configuration
•
IGMP And Multicast Configuration
MN700004 Rev 01
Software Upgrade and Reboot Options
277