Nokia ESB26 User Manual page 263

20.
Argument Description
query Displays the time interval, in seconds, between two specific queries.
responses Displays the expected response time, in seconds, for answering a specific query.
robustness Displays the number specific query packets sent by the switch.
Example
The following example displays static and dynamic multicast router interfaces for all VLANs.
device-name#show ip igmp snooping router-timers query
Query interval is 30 sec
device-name#show ip igmp snooping router-timers responses
Responses interval is 15 sec
device-name#show ip igmp snooping router-timers robustness
Robustness = 4 packets
show ip igmp snooping send-query
The show ip igmp snooping send-query command, in Privileged (Enable) mode, displays
the query generator information.
Command Syntax
device-name#show ip igmp snooping send-query
Example
device-name#show ip igmp snooping send-query
Responses interval is 15 sec
show mac-address-table multicast igmp
The show mac-address-table multicast igmp command, in Privileged (Enable) mode,
displays MAC address table entries for a VLAN.
Command Syntax
device-name#show mac-address-table multicast igmp [vlan <vlan-id>] [count]
Argument Description
vlan <vlan-id> (Optional) The multicast group VLAN ID.
count (Optional) Displays only the total number of entries for the selected criteria, not
the actual entries.
Example
The following example displays all the MAC address table entries for VLAN 1.
device-name#show mac-address-table multicast igmp vlan 1
MN700004 Rev 01
IGMP Snooping
252