Nokia ESB26 User Manual page 107

10.
MASK (Optional) The bit-mask that defines Object ID wildcard characters.
SNMP MIB-II System Group Elements Commands
Table 10-6 lists the configuration commands for the SNMP MIB-II system group elements.
Table 10-6 SNMP MIB-II System Group Elements Configuration Commands
C o m m a n d
snmp-server contact
snmp-server system-name
snmp-server location
Defining the System Contact String
The snmp-server contact command, in Global Configuration mode, sets the MIB-II system
contact string. The no form of this command removes the SNMP system contact string.
The system contact string is used for the textual identification of the contact person for this
managed node, together with information on how to contact this person. If no contact
information is known, the value is a zero-length string.
Command Syntax
device-name(config)#snmp-server contact .LINE-TEXT
device-name(config)#no snmp-server contact
Example
device-name(config)#snmp-server contact tom@comp.com
Argument Description
LINE-TEXT Descriptive system contact string, up to 80 characters long.
Defining the System Name
The snmp-server system-name command, in Global Configuration mode, sets the MIB-II
system name. The no form of this command removes the SNMP system name.
The system name is an administratively-assigned name for this managed node. By
convention, this is the node's fully-qualified domain name. If the name is unknown, the value
is a zero-length string.
Command Syntax
device-name(config)#snmp-server system-name .LINE-TEXT
device-name(config)#no snmp-server system-name
MN700004 Rev 01
SNMP Server Configuration
D e s c r i p t i o n
Sets the MIB-II system contact string.
Sets the MIB-II system name.
Sets the MIB-II system location string.
96