Nokia ESB26 User Manual page 113

10.
Command Syntax
device-name#show snmp-server access-list
Displaying the Pending Informs
The show snmp-server informs command, in Privileged (Enable) mode, displays the
pending informs.
Command Syntax
device-name#show snmp-server informs
Example
device-name#show snmp-server informs
Number of pending informs :0
device-name#
Configuration Examples
Configuring SNMP v2c inform notifications:
1. Enable the SNMP server
device-name(config)#snmp-server enable
2. Define the notification with name NAME, tag TAG, and create the notification as an
inform request:
device-name(config)#snmp-server notify NAME TAG inform
3. Define a notification target address with name ADDRESSNAME and IP address
193.124.13.6. Specify the default UDP port (162), the parameter name
(PARAMNAME), and a tag (TAG).
device-name(config)#snmp-server target-addr ADDRESSNAME 193.124.13.6 162 PARAMNAME TAG
4. To configure SNMP V2c inform notification, define a notification target parameter
with name PARAMNAME and security name usrV2, security model v2.
device-name(config)#snmp-server target-param PARAMNAME usrV2 v2c
5. Create a user with name usrV2 and assign this user to group grpV2. Specify the
SNMP version number v2c
device-name(config)#snmp-server user usrV2 group grpV2 v2c
6. Configure a group with name grpV2, SNMP version number 2. Specify read view –
all. Specify write view – all. Specify the notify view - all.
device-name(config)#snmp-server group grpV2 v2c read all write all notify all
7. Create a view with name all. Specify the OID-tree – Internet and include the Object
ID in the view.
device-name(config)#snmp-server view all internet include
MN700004 Rev 01
SNMP Server Configuration
102