Nokia ESB26 User Manual page 381

34.
device-name(config-if UU/SS/PP)#no dot1x port-control
Argument Description
auto
force-authorized
force-unauthorized
Example
device-name(config)#interface 1/1/1
device-name(config-if 1/1/1)#dot1x port-control auto
Forcing Re-authentication for a Specified Port
The dot1x re-authenticate command, in Interface Configuration mode, activates re-
authentication for all supplicants that are connected to the specified port.
Command Syntax
device-name(config-if UU/SS/PP)#dot1x re-authenticate
Example
device-name(config)#interface 1/1/1
device-name(config-if 1/1/1)#dot1x re-authenticate
Setting 802.1X to Multiple-Hosts Mode for a Specified Port
The dot1x multiple-hosts command, in Interface Configuration mode, sets 802.1X to
Multiple-Hosts mode on the specified port. The no form of this command sets the default
802.1X supplicant mode on a specified port.
By default, the 802.1X supplicant mode on a specified port is Single-Host mode.
Command Syntax
device-name(config-if
max-clients [<number>]]
device-name(config-if UU/SS/PP)#no dot1x multiple-hosts [per-mac-mode
max-clients [<number>]]
Argument Description
per-mac-mode (Optional). Sets 802.1X in Multiple-Hosts / Per-MAC-Authorization on this port.
max-clients (Optional). Specifies the maximum number of supplicants for this port.
number (Optional) The maximum number of supplicants allowed for this port. If no value
is specified, the command resets the number of allowed clients to the default
value of 0. The range is <1-500>.
Example
device-name(config)#interface 1/1/1
device-name(config-if 1/1/1)#dot1x multiple-hosts per-mac-mode max-
clients 2
MN700004 Rev 01
802.1X Port-Based Authentication
Sets 802.1X to auto mode on the specified port. Enables 802.1X on the
specified interface with the default Single-Host mode.
Sets 802.1X in Force-Authorized mode on the specified port. Using this
command is equivalent to stopping 802.1X.
Set 802.1X in Force-Unauthorized mode.
UU/SS/PP)#dot1x
370
multiple-hosts [per-mac-mode