Nokia ESB26 User Manual page 394

36.
test nvm-contents loader
test nvm-contents prom-access
test nvm-contents script-file-system
test nvm-contents startup-
configuration
test switch-core
test ram
test ports
test all
clear test-results
test end
self-test
The self-test command, in System mode, enters the self-test mode for performing diagnostics
and testing the device functionality.
Command Syntax
device_name(show system)#self-test
device_name(self-test)#
test cpu
The test cpu command, in self-test mode, validates the proper operation of Central Processing
Unit.
Command Syntax
device_name(self-test)#test cpu
Example
device_name(self-test)#test cpu
CPU validation --> OK
test nvm-contents application
The test nvm-contents application command, in self-test mode, performs diagnostic of the
primary/secondary application image. This diagnostic is performed by verifying the correct
CRC of application images saved in internal Flash memory.
Command Syntax
device_name(self-test)#test nvm-contents application (primary|secondary)
MN700004 Rev 01
Diagnostic Tests
Validates the loader image.
Validates the operability of EPROM.
Validates the script file system.
Validates the startup configuration.
Validates the switch core.
Tests the RAM.
Checks all ports.
Performs all tests.
Deletes all test results.
Ends the self-test mode.
383