Nokia ESB26 User Manual page 408

serial-number Configures the manufacturing serial numberл
show Displays board manufacturing details.
Table APPENDIX-4 Memory Mode Commands
more Filter command output
copy Copy block of memory
display Display block of memory
end End current mode and change to initial mode.
exit Exit current mode and down to previous mode
fill Fill block of memory by value
help Description of the interactive help system
list Print command list
quit Disconnect and logout
Description of Commands
Commands for Downloading Software and Starting the Switch Manually
To start the execution of the switch's application, use the following command:
start application
The start application command, in Loader mode, terminates the loader and starts the
execution of the switch's application.
Command Syntax
Loader>start application [safe]
Argument Description
safe (Optional) Start in safe mode with default configuration.
NOTE
The optional argument safe is used for technical support only.
Example
Loader>start application
Starting switch application from flash, please wait...
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
III