Nokia ESB26 User Manual page 218

17.
If VLAN management is disabled, the following will be disallowed:
•
Telnet to the switch
• SSH to the switch
• SNMP management
• Ping to the switch
•
TFTP download or upload
Command Syntax
device-name(config vlan)#management VLAN-list
Argument Description
VLAN-list List of VLAN IDs, in the form {k|k1-k2} [, {l | l1-l2}[,{m|m1-m2}[,... ]]], where
commas are used as term separators and hyphenated terms represent ranges.
For example:
The expression 2,4,8-32,64-512 represents VLAN IDs 2, 4, the range from 8 to 32 and
the range from 64 to 512.
Example
In the following example, the switch can be managed only by VLAN 2. VLAN 100, 101 and
102 were created but the switch cannot be managed from the workstations, only from the
management station.
device-name#configure terminal
MN700004 Rev 01
Virtual LANs (VLANs)
Figure 17-3 VLAN Management Example
207