Nokia ESB26 User Manual page 412

show
The show command, in Board Configuration mode, displays the manufacturing serial board
number and manufacturing details .
Command Syntax
Loader(board)> show
Example
Loader(board)>manufacturing-details
Serial number : 134569
Assembly No : 1234567
HW revision : 123
HW subrevision : 123
Memory Debug Tools
The table below summarizes the CLI commands available at the Loader memory mode. The
commands are described in the subsections that follow.
Table APPENDIX-6 Loader Memory Mode Configuration Commands
C o m m a n d D e s c r i p t i o n
memory Switches from Loader initial to Loader memory debug tools mode.
copy Copies a block of memory.
display Displays a block of memory.
fill Fill a block of memory with a specified value.
memory
The memory command, in Loader mode, switches the CLI from Loader mode to Loader
memory.
Command Syntax
Loader>memory
The command will be followed by the following prompt line:
Loader(memory)#
copy
The copy command, in Loader Memory mode, copies a block of memory that is specified by
block-length from the specified source address to the specified destination address.
Command Syntax
Loader(memory)#copy SRC_ADDR DST_ADDR BLK_LEN
MN700004 Rev 01
APPENDIX
Loader, Sysloader and Dual Boot
VII