Nokia ESB26 User Manual page 240

18.
Example
The following example configures hybrid-1 scheduling on port 1/1/3. The show qos
scheduling command displays the results on the specified port.
device-name(config)#int 1/1/3
device-name(config-if 1/1/3)#qos scheduling hybrid-1
device-name(config-if 1/1/3)#end
device-name#show qos scheduling 1/1/3
===============================================================
Interface | scheduling |txq0|txq1|txq2|txq3|txq4|txq5|txq6|txq7
----------+------------+----+----+----+----+----+----+----+----
1/ 1/ 3 | hybrid-1
Configuring Hybrid-2 QoS Queue Handling
The qos scheduling hybrid-2 command, in Global Configuration or Interface Configuration
mode, is used to apply and configure the second hybrid QoS algorithm.
In the second hybrid algorithm, txq6 and txq7 are set to behave according to strict priority
scheduling, and the rest of the queues behave according to Weighted Round Robin (WRR).
According to this configuration:
•
tqx7 is serviced as long as it has packets for transmission.
•
When txq7 is empty, txq6 is serviced as long as it has packets.
•
When both txq6 and txq7 are empty, the rest of the queues are serviced according to
their assigned weights.
By default, the SP scheduling is applied.
Command Syntax
device-name(config)#qos
weight> <txq2-weight> <txq3-weight> <txq4-weight> <txq5-weight>
Argument Description
<txq0-weight> ...
<txq5-weight>
Example
The following example configures hybrid-2 scheduling on port 1/1/4. The show qos
scheduling command displays the results on the specified port.
device-name(config-if 1/1/4)#qos scheduling hybrid-2 packets 10 10 10 20 20 30
device-name(config-if 1/1/4)#end
device-name#show qos scheduling 1/1/4
===============================================================
Interface | scheduling |txq0|txq1|txq2|txq3|txq4|txq5|txq6|txq7
----------+------------+----+----+----+----+----+----+----+----
1/ 1/ 4 | hybrid-2
Configuring Hybrid-3 QoS Queue Handling
The qos scheduling hybrid-3 command, in Global Configuration or Interface Configuration
mode, is used to apply and configure the third hybrid QoS algorithm.
MN700004 Rev 01
Quality of Service
| 1 | 1 |
scheduling
The weights assigned to the weighted transmit queues. The values must be
positive and add up to 10 or 100.
| 10 | 10 | 10 | 20 | 20 | 30 |
229
2 | 2 | 2 | 1 |
hybrid-2 <txq0-weight>
1 1 2 2 2 1 1
1 |
<txq1-
|