Nokia ESB26 User Manual page 346

29.
Description of Commands
show configuration-history
The show configuration-history command, in Privileged (Enable) mode, displays all
configuration commands stored in the NVRAM during the specified session. If no session
number is specified, the command displays all configuration commands stored in the
NVRAM during the last session.
Command Syntax
device-name#show configuration-history [<session-number>]
Argument Description
session-number
Examples
1. The following example displays the last configuration-session (two sessions were
recorded):
device-name#show configuration-history
! MON MAR 11 07:18:03 2002 :: vty :: console
! Configuration session 2 start
configure terminal
ip address 131.119.251.201/24
exit
! Configuration session 2 end
2. The following example displays the specified configuration-session (session number 1):
device-name#show configuration-history 1
! THU MAR 07 18:40:17 2002 :: vty :: console
! configuration session 1 start
configure terminal
network 36.0.0.0/24 area 36.0.0.0
area 36.0.0.0 stub
area 36.0.0.0 default-cost 20
! Configuration session 1 end
show configuration-history all
The show configuration-history all command, in Privileged (Enable) mode, displays all
configuration commands stored in the NVRAM during all recorded sessions.
Command Syntax
device-name#show configuration-history all
Example
The following example displays all recorded configuration-sessions:
MN700004 Rev 01
NVRAM Configuration History
(Optional) Number of session displayed.
335