Nokia ESB26 User Manual page 149

13.
0xa1391880 (tSpanPRS):
0xa1391880 (tSpanPRS): End-Roles-Selection
By default, the debug is disabled.
Command Syntax
device-name#debug rstp {all | handshake | roles | flush}
device-name#no debug rstp {all | handshake | roles | flush}
Argument Description
all Activates all RSTP debug options.
handshake Activates Hand Shake protocol debugging (IEEE 802.1w).
roles Activates debugging of role selection (designated port, root port, etc.)
flush Activates debugging of port table flushing (MAC addresses).
Displaying the Status of the RSTP Debug
The show debug rstp command, in Privileged (Enable) mode, displays the status of Rapid
Spanning Tree protocol (RSTP) debugging. The debug commands can help the network
manager to monitor a session as it proceeds on the switch.
Command Syntax
device-name#show debug rstp
MN700004 Rev 01
Rapid Spanning Tree Protocol (RSTP)
138