Bist Commands - Nokia ESB26 User Manual

35.
ESB26#self-testProcessingBIST by request... CPUCore Test
RAM Test :CPUInterface Test
Core : Crossbar Existence - PassedOn-boardPower Test
Power PHY - Passed
PassedTemperatureTest
Test : Broadcast Limit

BIST Commands

The available BIST commands are summarized in Table 35-2.
Table 35-2 BIST Commands
C o m m a n d D e s c r i p t i o n
self-test Initiates BIST by Request.
show self-test Issues a report on the current built-in test status (obtained by the last BIST).
Description of Commands
self-test
The self-test command, in Privileged (Enable) mode, initiates BIST by Request. All BIST
tests are executed except for CPU Notify RAM Test (not allowed because it resets the
memory). Execution of BIST by Request updates the statuses of test results. The command
issues a full BIST status report (except for the CPU Notify RAM Test).
Command Syntax
device-name#self-test
device-name#no self-test
Example
device-name#self-test
Processing BIST by request...
CPU Core Test
CPU Validation
CPU Notify RAM Test
RAM Validation
CPU Interface Test
UART Existence
Testing Switch Core
Crossbar Existence - Passed
On-board Power Test
MN700004 Rev 01
Built-In Self Test (BIST)
: UART Existence
On-board Power CPU - Passed
: Temperature
- Passed
:
- Passed
:
- Passed
:
- Passed
:
:
379
:CPUNotify
- PassedTestingSwitch
: On-board
On-board Power OC
- PassedBroadcastLimit
-