Boot Mode - Nokia ESB26 User Manual

23.
saving the current configuration to the NVRAM. When used without arguments, the
command functions as the reload save command.
When you use the reload command, the software requests confirmation before it closes down.
Command Syntax
device-name#reload [save|no-save]
Argument Description
save (Optional). Save the running configuration definitions. This is the default.
no-save Do not save the running configuration definitions.
Examples
1. Saving the current configuration and rebooting the switch (the save keyword is optional):
device-name#reload save
save current configuration and reboot the switch ? [y/n]: y
Rebooting ...
2. Rebooting the switch without saving the current configuration:
device-name#reload no-save
Proceed with reload ? [y/n] : y
Rebooting ...
reload to-defaults
The reload to-defaults command, in Privileged (Enable) mode, resets the switch to its
factory-default configuration and reboots it.
Command Syntax
device-name#reload to-defaults

boot mode

The boot-mode command, in Global Configuration mode, sets the boot mode to primary,
secondary or auto.
By default, the boot mode is primary.
Command Syntax
device-name(config)#
Argument Description
primary Boots the image from the first flash
secondary Boots the image from the secondary flash
MN700004 Rev 01
Software Upgrade and Reboot Options
boot-mode (primary|secondary|auto)
279