but possibly too high gain values for some applications. The figure below shows
speed responses at a speed reference step (typically 1...20%).
n
%
n
N
A
A: Undercompensated
B: Normally tuned (autotuning)
C: Normally tuned (manually). Better dynamic performance than with B
D: Overcompensated speed controller
Autotune results
At the end of a successful autotune routine, its results are automatically transferred
into parameters
•
25.02
(proportional gain of the speed controller)
•
25.03
(integration time of the speed controller)
•
25.37
(mechanical time constant of the motor and machine).
Nevertheless, it is still possible to manually adjust the controller gain, integration time
and derivation time.
B
Program features 47
C
D
t