ABB ACS560 Firmware Manual page 171

No. Name/Value
05.10 Control board
temperature
-100... 300 °C
05.11 Inverter
temperature
-40.0...160.0%
05.20 Diagnostic word 1
Bit Name
0 Any warning or fault
1 Any warning
2 Any fault
3 Reserved
4 Overcurrent flt
5 Reserved
6 DC overvoltage
7 DC undervoltage
8 Reserved
9 Device overtemp flt
10...15 Reserved
0b0000...0b1111
05.21 Diagnostic word 2
Bit Name
0...9 Reserved
10 Motor overtemperature fault
11...15 Reserved
0b0000...0b1111
05.22 Diagnostic word 3
Bit Name
0...8 Reserved.
9 kWh pulse
10 Reserved.
11 Fan command.
12...15 Reserved
0b0000...0b1111
05.80 Motor speed at fault
-30000.00...
30000.00 rpm
Description
Measured temperature of the control board.
Control board temperature in degrees Celsius or Fahrenheit.
Estimated drive temperature in percent of fault limit. The fault
limit varies according to the type of the drive.
0.0% = 0 °C (32 °F)
100.0% = Fault limit
Drive temperature in percent.
Diagnostic word 1. For possible causes and remedies, see
chapter Fault tracing.
Value
Yes = Drive has generated a warning or tripped on a fault.
Yes = Drive has generated a warning.
Yes = Drive has tripped on a fault.
Yes = Drive has tripped on fault
Yes = Drive has tripped on fault
Yes = Drive has tripped on fault
Yes = Drive has tripped on fault
Diagnostic word 1.
Diagnostic word 2. For possible causes and remedies, see
chapter Fault tracing.
Value
Yes = Drive has tripped on fault
temperature 1
Diagnostic word 2.
Diagnostic word 3. For possible causes and remedies, see
chapter Fault tracing.
Value
1 = kWh pulse is active.
1 = Drive fan is rotating above idle speed.
Diagnostic word 3.
Displays the motor speed (01.01) at which fault occurred.
Motor speed at fault.
Parameters 171
2310 Overcurrent.
3210 DC link overvoltage.
3220 DC link undervoltage.
4310 Excess temperature.
4981 External
or 4982 External temperature
Def/FbEq16
0
1 = unit
0
1 = 1%
0b0000
1 = 1
0b0000
2.
1 = 1
0b0000
1 = 1
-
See par.
46.01