Abb Standard Macro (Vector) - ABB ACS560 Firmware Manual

ABB standard macro (vector)

The ABB standard macro (vector) is similar to the ABB standard macro. The ABB
standard uses scalar motor control mode where as the ABB standard macro (vector)
uses vector control as motor control mode.
Similar to ABB standard macro, ABB standard (vector) has the following features:
• 2-wire I/O configuration with three constant frequency references
• Applicable for normal control purpose
• One signal is used to start or stop the motor and another signal is used to select
the direction.
To enable the macro, navigate to
• Main menu
or
• Main menu
[17] ABB standard

Connection macro

Complete parameter list

(vector).
Control macros 105
ABB standard (vector)

parameter 96.04 Macro select
