Process Pid Set 2 - ABB ACS560 Firmware Manual

No. Name/Value
40.91 Feedback data
storage
-327.68...327.67
40.92 Setpoint data
storage
-327.68...327.67
40.96 Process PID
output%
-100.00...100.00%
40.97 Process PID
feedback%
-100.00...100.00%
40.98 Process PID
setpoint%
-100.00...100.00%
40.99 Process PID
deviation%
-100.00...100.00%
41

41 Process PID set 2

41.08 Set 2 feedback 1
source
41.09 Set 2 feedback 2
source
41.10 Set 2 feedback
function
41.11 Set 2 feedback filter
time
41.14 Set 2 setpoint
scaling
41.15 Set 2 output scaling
41.16 Set 2 setpoint 1
source
41.17 Set 2 setpoint 2
source
Description
Storage parameter for receiving a process feedback value
e.g. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data. Set
the target selection parameter of that particular data
(58.101...58.114) to Feedback data
feedback 1 source (or 40.09 Set 1 feedback 2
Feedback data storage.
Storage parameter for process feedback.
Storage parameter for receiving a process setpoint value e.g.
through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data. Set
the target selection parameter of that particular data
(58.101...58.114)) to Setpoint data
setpoint 1 source (or 40.17 Set 1 setpoint 2
Setpoint data storage.
Storage parameter for process setpoint.
Percentage scaled signal of parameter
feedback actual. Correct later.
Percentage.
Percentage scaled signal of parameter
feedback actual.
Percentage.
Percentage scaled signal of parameter
setpoint actual.
Percentage.
Percentage scaled signal of parameter
deviation actual.
Percentage.
A second set of parameter values for process PID control.
The selection between this set and first set (parameter group
40 Process PID set 1) is made by parameter
set1/set2 selection.
See also parameters 40.01...40.06, and the control chain
diagrams on pages 495
See parameter 40.08 Set 1 feedback 1
See parameter 40.09 Set 1 feedback 2
See parameter 40.10 Set 1 feedback
See parameter 40.11 Set 1 feedback filter
See parameter 40.14 Set 2 setpoint
See parameter 40.15 Set 2 output
See parameter 40.16 Set 1 setpoint 1
See parameter 40.17 Set 1 setpoint 2
storage. In 40.08 Set 1
source), select
storage. In 40.16 Set 1
source), select
40.01 Process PID
40.02 Process PID
40.03 Process PID
40.04 Process PID
40.57 PID
and 498.
source.
source.
function.
time.
scaling.
scaling.
source.
source.
Parameters 309
Def/FbEq16
0.00
100 = 1
0.00
100 = 1
0.00
1=1
0.00
1=1
0.00
1=1
0.00
1=1
AI2 percent
Not selected
In1
0.000 s
0.00
0.00
AI1 percent
Not selected