ABB ACS560 Firmware Manual page 189

No. Name/Value
Speed ref safe
12.04 AI supervision
selection
Bit Name
0 AI1 < MIN
1 AI1 > MAX
2 AI2 < MIN
3 AI2 > MAX
4...15 Reserved
0b000...0b1111
12.11 AI1 actual value
0.000...11.000 V
12.12 AI1 scaled value
-32768.000...
32767.000
12.13 AI1 forced value
0.000...11.000 V
12.15 AI1 unit selection
V
mA
Description
Drive generates a warning
speed to the speed defined by parameter
safe (or 28.41 Frequency ref safe
is being used).
WARNING! Make sure that it is safe to continue
operation in case of a communication break.
Specifies the analog input limits to be supervised. See
parameter 12.03 AI supervision
Description
1 = Minimum limit supervision of AI1 active.
1 = Maximum limit supervision of AI1 active.
1 = Minimum limit supervision of AI2 active.
1 = Maximum limit supervision of AI2 active.
Activation of analog input supervision.
Displays the value of analog input AI1 in mA or V (depending
on whether the input is set to current or voltage by a hardware
setting).
This parameter is read-only.
Value of analog input AI1.
Displays the value of analog input AI1 after scaling. See
parameters 12.19 AI1 scaled at AI1 min
at AI1 max.
This parameter is read-only.
Scaled value of analog input AI1.
Forced value that can be used instead of the true reading of
the input. See parameter
Forced value of analog input AI1.
Selects the unit for readings and settings related to analog
input AI1.
Note: In firmware ASCL2 and ASCL4), this setting must
match the corresponding hardware setting on the drive
control unit. See chapter Electrical installation, section
Switches in the Hardware manual of the drive and the default
control connections for the macro in use in chapter
macros (page 101). Control board reboot (either by cycling
the power or through parameter
required to validate any changes in the hardware settings.
Volts.
Milliamperes.
(A8A0 AI supervision) and sets the
22.41 Speed ref
when frequency reference
function.
and 12.20 AI1 scaled
12.02 AI force selection.
96.08 Control board
Parameters 189
Def/FbEq16
4
0b0000
1 = 1
0
1000 = 1 unit
0
1 = 1
0
1000 = 1 unit
V
Control
boot) is
2
10