2600-00CTEIGAA
Ver.
2.8.6 Remaining Hybrid cable
Follow the steps below to organize the remaining cable after connecting the hybrid cable
(power cable, CPRI cable) to RRH-P4.
1) Loop the excess length of the power cable and CPRI cable, and attach to the RRH-P4
fixing pole using a cable tie. Ensure to respect the optic cable's bending radius of
(R=4.33 in./110 mm).
2) Bind the power cable and CPRI cable together with the feeder line using a cable tie.
RRH-P4
© SAMSUNG Electronics Co., Ltd.
4.0
Cable Tie
Figure 2.45 Remaining Hybrid cable (1)
Smart MBS RRH-P4 Installation Manual/Ver.3.0
Feeder Line
RRH-P4 Fixing Pole
Cable Tie
Remaining cable
2-65