Samsung Smart MBS RRH-P4 Installation Manual page 127

2600-00CTEIGAA Ver.
7) Insert the heat shrink tube into the 1/2 in. feeder line fitted with the N type-male connector as shown in the
figure below.
- Heat shrink tube: Φ 1.1 in., 3.94 in. (Φ 28 mm, 100 mm)
8) Shrink the heat shrink tube inserted into the 1/2 in. feeder line using a heating gun.
Figure C.11 Assembling the N type-male Connector (1/2 in. Feeder Line) (4)
Checking to carry out when assembling the N type-male connector
The shape, tool and assembly method may differ depending on the connector
type and manufacturer. Make sure to check the user manual provided by the
manufacturer before assembling.
© SAMSUNG Electronics Co., Ltd.
4.0
Smart MBS RRH-P4 Installation Manual/Ver.3.0
Clamping Nut
Heat Shrink Tube
[1.1 in. (28 mm)]
Heating Gun
C-11