Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
1.4 Installation Precaution
The following precaution must be observed to prevent accidents during RRH-P4 installation.
Before Installation
Install a high voltage warning sign near the area where high voltage cable is located.
Install a restricted entry warning sign near the potential accident area.
Cover exposed areas such as junctions, ceilings, footholds etc. with safety rails or
fence off the area.
Study use of the fire alarm and the location of the fire extinguisher and how to use it.
Check the location of the nearest emergency exit.
During Installation
Cut all equipment power before installation.
Always wear protection gloves and goggles when drilling holes into the wall or ceiling.
To prevent electric shocks from metallic objects, remove all accessories such as
watches or rings.
Wearing protection gloves and goggles
Make sure to wear protection gloves and goggles to prevent damages from debris
while drilling holes in a wall or ceiling.
Watches, Rings, and Other Metallic Accessories
Do not wear accessories such as watches and rings in order to prevent electrical
shock.
Do not work by yourself
Do not work by yourself in any key process.
© SAMSUNG Electronics Co., Ltd.
4.0
Smart MBS RRH-P4 Installation Manual/Ver.3.0
1-7
Advertisement
Table of Contents
