2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
14) Close the power window cover after connecting power cable. And tighten the screws
by torque 0.87 lbf.ft (12 kgf. cm) with torque driver (T20). Tighten the screws in order
of
15) Fixing the external power cable of RRH-P4 and the external power cable support
bracket with stainless steel tie.
Torque Driver
2-54
4.0
Figure 2.40 Connecting RRH-P4 power cable (AWG10) (7)
.
DC Power Window Cover
Cover Fixing Screw (T20)
External Power Cable
Support Bracket
Stainless Steel Tie
Power Cable (AWG8)
© SAMSUNG Electronics Co., Ltd.
Rain Protection
Gasket