Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
ANNEX C. Assembling connector
C-18
4.0
Heat Shrink Tube
Heating Gun
Figure C.18 Shrinking the Heat Shrink Tube-Connector (2)
4) Set the heating gun to 482~572°F (250~300°C).
5) Holding one end of the heat shrink tube with your
hand, apply heat starting from the marked part at
the center using the heating gun.
6) Rotate the heating gun so that heat is evenly
distributed to prevent that bubbles are generated
or heat is concentrated to a specific part.
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
