Table B.2 Curvature Radius Of Feeder Cable For Indoor; Table B.3 Curvature Radius Of Lmr-400 (Based On Times Microwave System - Samsung Smart MBS RRH-P4 Installation Manual

2600-00CTEIGAA Ver.
LS Feeder Line
RFS Feeder Line

Table B.3 Curvature Radius of LMR-400 (Based on Times Microwave system)

Radius of Curvature of Feeder Line
When installing a feeder line, the radius of curvature of the sections where cables
bent should be larger than the allowed radius of curvature. If the radius of curvature
for the feeder line installation is less than the allowed radius of curvature, it may
affect the performance of the system.
© SAMSUNG Electronics Co., Ltd.
4.0

Table B.2 Curvature Radius of Feeder Cable for Indoor

Specification
HFSC 6D 1/4 in.
HFSC 10D 3/8 in.
HFSC 12D 1/2 in.
HFSC 22D 7/8 in.
SCF14-50 1/4 in.
SCF38-50 3/8 in.
SCF12-50 1/2 in.
UCF78-50 7/8 in.
Specification
LMR-400
Smart MBS RRH-P4 Installation Manual/Ver.3.0
Allowed Radius of Curvature
0.98 in. (25 mm)
0.98 in. (25 mm)
1.26 in. (32 mm)
4.92 in. (125 mm)
0.98 in. (25 mm)
0.98 in. (25 mm)
1.26 in. (32 mm)
4.92 in. (125 mm)
Allowed Radius of Curvature
1 in. (25.4 mm)
4 in. (101.6 mm)
Remark
Indoor
Remark
Installation
Repeated
B-3