Table 1.2 Minimum Allowed Cable Bend Radius - Samsung Smart MBS RRH-P4 Installation Manual

page of 162

/ 162
Contents
Table of Contents
Bookmarks

Table of Contents

2600-00CTEIGAA

Ver.

GV/CV/FR-8

Optic Cable

UTP/FTP/S-FTP Cable

1/2 in. Feeder Line (Indoor)

1/2 in. Feeder Line (Outdoor)

7/8 in. Feeder Line (Outdoor)

1 1/4 in. Feeder Line (Outdoor)

1 5/8 in. Feeder Line (Outdoor)

LMR-400

RG-316D

Hybrid

Cable

* If the allowed cable bend radius is specified by the manufacturer, comply with the bend radius specified.

Cable Binding

Cable binding involves fixing and arranging an installed cable using binding strings, cable

ties, binding lines, and ram clamps, etc.

Follow these guidelines when binding a cable.



Be careful not to damage the cable during binding.



Use appropriate cable binding tools according to the target location (indoor or outdoor,

etc.) and the use of the cable (power supply cable, optical cable, feeder line, etc.).



Do not let the cutting section of a cable tie and binding line, etc. be exposed to the

outside. This may cause damage to cables or personal injury. Make sure that the

cutting sections of cables are not exposed to the outside.



Trim the binding string so that you have about 1.97 in. (5 cm) of string left from the

knot. And insert the remaining string into the knot and make sure the knot does not

loosen.



If there is a potential danger of contact failure in a connector connection due to tension,

install the cable in the shortest distance.

4.0