Samsung Smart MBS RRH-P4 Installation Manual page 45

2600-00CTEIGAA Ver.
Mounting Protection Cap on RRH-P4 Output Port
Make sure to mount a protection cap on the output ports (ANT 0-3) when you
putting up or down the RRH-P4.
If you use the RRH-P4 without mounting a protection cap, it may cause damage
to or scratches on the output port and affect the output performance of the RRH-
P4.
[Good: Protection Cap Mounted]
How to lift up RRH-P4
After fixing the bracket of RRH-P4 side, bind the rope to the heat sink of RRH-P4
and a space between top bracket and RRH-P4, lift up using a hoist lift as shown
below.
For the safety, maintain the status of lifting up by completing RRH-P4 installation.
Unbind the rope after the installation is complete.
© SAMSUNG Electronics Co., Ltd.
4.0
Hoist Line
Rope
RRH-P4
Top Bracket
Smart MBS RRH-P4 Installation Manual/Ver.3.0
[Bad: Protection Cap Not Mounted]
Protection Cap
Not Mounted
2-15