Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
2.4 Cable Gland Assembly and Cable Installation
Caution when assembling the cable gland
Ensure that all parts of the cable gland are assembled in the correct sequence.
Incorrect assembly may result in influx of external air or moisture into the system
and may cause corrosion, system malfunction and/or critical failure of the cooling
system.
Caution when installing the cable in the cable gland
Only one cable of permitted specification (radius) should be installed in the cable
gland.
- Installing a cable of smaller radius than the permitted specification may result in
- Installing a cable thicker than the permitted specification or installing two or
Caution when loosen and tighten the Cable Gland Nut
In case of assembling the cable gland and cabling, do not loosen and tighten by
turning the cable gland body or other parts. turning the cable gland body may
cause corrosion and system failure by entering of any external air and moisture.
Torque Wrench
Tighten the Cable Gland Nut by Using Torque Wrench
Cable gland nut should be tightened by using torque wrench and the torque value
meets standard.
2-4
4.0
influx of external air or moisture into the system and may cause corrosion or
system malfunction.
more cables in the gland may damage the gland.
Cable Gland Body
Torque Wrench
Cable Gland Nut
Torque Wrench
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
