2600-00CTEIGAA
Ver.
14) Close the power window cover after connecting power cable. And tighten the screws
by torque 0.87 lbf.ft (12 kgf.cm) with torque driver (T20). Tighten the screws in order
of
15) Fixing the external power cable of RRH-P4 and the external power cable support
bracket with stainless steel tie.
Torque Driver
© SAMSUNG Electronics Co., Ltd.
4.0
Figure 2.33 Connecting RRH-P4 power cable (AWG8) (7)
Smart MBS RRH-P4 Installation Manual/Ver.3.0
.
DC Power Window Cover
Cover Fixting Screw (T20)
External Power Cable
Support Bracket
Stainless Steel Tie
Power Cable (AWG8)
Rain Protection
Gasket
2-43