Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
ANNEX C.
C.1 RJ-45 (Shield type)
Below is the method for assembling the RJ-45 (Shield type) connector.
1
1), 2) Prepare work tools and materials.
4
4) Pass the cable through the
RJ-45 cap.
7
7) Cut the shield leaving a 0.2 in.
(5 mm) of it.
© SAMSUNG Electronics Co., Ltd.
4.0
Assembling connector
2
5
5) Remove the coating 0.67 in.
(17 mm) from the end.
8
8) Arrange the cable in reference
to the pin map.
Figure C.1 Assembling the RJ-45 Connector (Shield Type) (1)
Smart MBS RRH-P4 Installation Manual
3
3) Pass the cable through the
marking tube.
6
6) Push the shield backward,
and cut the aluminum shield.
9
9) Cut the cable to make it
0.47 in. (12 mm) long.
C-1
Advertisement
Table of Contents
