Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
C) Place the RRH-P4 (Attaching Top bracket and bottom bracket) to the pole front, place the rear bracket to
the pole rear, and fix these firmly with insulation M12 × 180L Hex.bolt, plane washer, spring washer and
Hex. nut.
Cautions When Using Pole Fasteners
The fasteners used to attach the pole, including the hex. bolts, hex. nut, spring
washers and plane washers must be made of stainless steel (STS 304).
Otherwise, it may cause corrosion and rust to fixing materials.
2-14
4.0
5.69 in.
(144.5 mm)
Left
Figure 2.11 Fixing 1 sector pole (2)
Pole
(Φ 3~4.5 in./Φ 76.3~114.3 mm)
Top Bracket
M12 × 180L Hex. Bolt
Rear Bracket
M12 Plane Washer
M12 Spring Washer
M12 Hex. Nut
Bottom Bracket
Rear Bracket
4.8 in.
(122 mm)
Right
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
