Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
Caution for connecting Feeder Line Connector
When connecting the feeder line between RRH-P4 RF port and RF antenna, each
port and the feeder line connector should be tighten by 14.46 lbf.ft (200 kgf.cm)
torque to minimize influence of PIMD.
2-18
4.0
RF Antenna
Antenna Connector (Din Type-Female)
Din-Type Male Connector
for 1/2 in. Feeder Line
Heat Shrink Tube (Jelly Type)
1/2 in. Feeder Line
Figure 2.14 Connecting RRH-P4 Feeder Line (2)
Detail 'B'
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
