Connecting Hybrid Cable; Installing Hybrid Cable - Samsung Smart MBS RRH-P4 Installation Manual

2600-00CTEIGAA Ver.
CHAPTER 2. Installation of RRH-P4

2.8 Connecting Hybrid cable

2.8.1 Installing Hybrid cable

Follow the steps below to install the hybrid cable.
1) Unpack the box. (A-D)
2) Pull up the tower. (E-F)
A) Use a crowbar to open the wooden box cover.
After opening the cover, ensure to remove the remaining nails as they may cause injury.
Crowbar
B) Hold both ends of the hybrid cable and lift it out of the box. Tape the power cable and optic cable
separately at 3.28 ft (1 m) interval. Also, tape the exposed optic connector to prevent damage.
2-26
4.0
Figure 2.18 Installing Hybrid cable (1)
...
3.28 ft 3.28 ft
(1 m) (1 m)
© SAMSUNG Electronics Co., Ltd.
Cover
Wooden Box
Tape