Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
ANNEX C. Assembling connector
5) Insert the o-ring, clamping nut, insert ring and N type-male body to the stripped 1/2 in. feeder line in this order.
6) Tighten the clamping nut and N type-male body inserted into the 1/2 in. feeder line firmly using a spanner.
The recommended torque for tightening the clamping nut and N type-male body is 306~510 lbf·ft
(30~50 N.m). (Note that it should only be fastened by rotating the clamping nut with the external body in a
fixed and stable position.)
Maintainging
fixing status
Figure C.10 Assembling the N type-male Connector (1/2 in. Feeder Line) (3)
C-10
4.0
O-Ring
Clamping Nut
Insert Ring
N type-Male Body
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
