Table of Contents
Advertisement
2600-00CTEIGAA
Ver.
CHAPTER 2. Installation of RRH-P4
Follow the steps below to connect the shield ground cable of hybrid cable to the tower
ground bar.
1) Install the shield ground cable of hybrid cable to the tower ground bar where the RRH is installed.
2) Install the pressure terminal that meets the tower ground bar specifications to the connected ground
cable.
3) Fix the pressure terminal installed to the cable to the tower ground bar.
Figure 2.44 Hybrid Cable Shield Grounding Connection_Tower Ground Bar
2-64
4.0
Tower Ground Bar
Shield Ground Cable of Hybrid Cable #0
Shield Ground Cable of Hybrid Cable #1
Shield Ground Cable of Hybrid Cable #2
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
