Configuring V-Vpls/Vpls Parameters - Nokia 7302 Manual

Virtual Private LAN Service
•
•
5.8.2
The following parameters and configuration elements can be modified or configured
after the v-VPLS/VPLS is created:
•
•
•
•
•
•
•
•
•
5.8.2.1
The maximum number of forwarding database entries can be configured for both
learned and static MAC addresses for a v-VPLS/VPLS instance.
configure service vpls <service-id> [no] fdb-table-size
5.8.2.2
The maximum number of multicast database entries possible system wide for both
learned and static is 4093. This is because the default system uses three of the
multicast resources. Also each VPLS service (L2Vpn/VPLS) will consume one
mulitcast resource for flooding the traffic on service members. So the mcast scaling
will be further reduced in proportion to the number of VPLS services configured.
The maximum number of multicast database entries for both learned and static
multicast addresses can be configured for the v-VPLS/VPLS instance.
configure service vpls <service-id> mfib-table-size <size>
192
Restricted MAC move is enabled (i.e MACs learned on regular ports overrule
MACs learned on residential ports; MACs learned on residential ports cannot
override MACs learned on regular ports).
MAC aging is 300 seconds for MACs learned on SAPs. MAC aging is 900
seconds for MACs learned on spoke/mesh SDP s. The MAC aging can be
modified but cannot be disabled.

Configuring v-VPLS/VPLS parameters

service description
FIB size
MFIB size
MAC learning and aging
IGMP snooping
user-to-user communication
unrestricted MAC move
service Dot1q Etype
External Packet Forwarding
FIB size
MFIB size
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13