Customer; Contact; Table 6 Customer Command; Table 7 Contact Command - Nokia 7302 Manual

Services Overview
3.17.2.1
Table 6
3.17.2.2
Table 7
80

customer

customer command
Item Description
Syntax customer customer-id [create]
no customer customer-id
Context configure>service
Description This command creates a customer ID and customer context used to associate information with
a particular customer. Services can later be associated with this customer at the service level.
Each customer-id must be unique. The create keyword must follow each new customer
customer-id entry.
Enter an existing customer customer-id (without the create keyword) to edit the customer's
parameters.
Default customer 1 always exists on the system and cannot be deleted.
The no form of this command removes a customer-id and all associated information. Before
removing a customer-id, all references to that customer in all services must be deleted or
changed to a different customer ID.
Parameters customer-id — Specifies the ID number to be associated with the customer, expressed as an
integer.
Values: 1...2147483647

contact

contact command
Item Description
Syntax contact contact-information
no contact contact-information
Context configure>service>customer
Description This command allows you to configure contact information for a customer.
Include any customer-related contact information such as a technician's name or account
contract name.
Default No contact information is associated with the customer-id.
The no form of this command removes the contact information from the customer ID.
Parameters contact-information — The customer contact information entered as an ASCII character string
up to 80 characters in length. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes. Any printable, seven bit ASCII characters
may be used within the string.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13